Shell脚本编写Nagios插件监控程序资源占用

一般情况下,我们只需要监控程序进程在没在就可以了。但是这次遭遇了这样的事,公司开发的程序,程序进程还在,但是死锁了。导致大范围的影响,更要命的是根本不知道问题出在哪里,还是别的测试部同事帮忙发现的,真是丢尽运维的脸了…
为避免下次再遭遇到这样的情况,分析了这次进程死锁的现象,发现死锁会占用100%的cpu,正常情况下只占用10%以内。决定编写nagios插件,用来监控程序占用的资源,包括cpu,内存等。

一、shell脚本需求分析:

   能设置cpu,mem的阈值,资源占用超过阈值就报警。
   要能判断这个进程是否存在,若有一个不存在,则报警。

二、shell脚本执行效果如下:

1、如果输入格式不正确,则输出帮助信息

[root@center230 libexec]# shcomponent_resource.sh
Usage parament:
   component_resource.sh [--cpu] [--mem]
 
Example:
   component_resource.sh --cpu 50 --mem 50

2、若没超出阈值,输出资源占用情况,退出值为0

[root@center230 libexec]# shcomponent_resource.sh  --cpu 50 --mem 50
VueSERVER_cpu_use=5.6% VueCache_cpu_use=1.9%VueAgent_cpu_use=0.0% VueCenter_cpu_use=0.0% VueDaemon_cpu_use=0.0%;VueSERVER_mem_use=0.2% VueCache_mem_use=7.4% VueAgent_mem_use=0.5% VueCenter_mem_use=0.1%VueDaemon_mem_use=0.0%
[root@center230 libexec]# echo $?
0

3、若超出阈值,输出资源占用情况,退出值为2

[root@center230 libexec]# shcomponent_resource.sh  --cpu 5 --mem 5
VueSERVER_cpu_use=9.4% VueCache_cpu_use=0.0%VueAgent_cpu_use=0.0% VueCenter_cpu_use=0.0% VueDaemon_cpu_use=0.0%;VueSERVER_mem_use=0.2% VueCache_mem_use=7.4% VueAgent_mem_use=0.5%VueCenter_mem_use=0.1% VueDaemon_mem_use=0.0%
[root@center230 libexec]# echo $?
2

4、若进程不存在,输出down掉的进程,以及正常使用中的进程资源情况,退出值为2

[root@yckj scripts]# sh component_resource.sh--cpu 50 --mem 50
Current VueDaemon VueCenter VueAgent VueCache VueSERVER is down.
[root@yckj scripts]# echo $?
2

三、Shell脚本代码如下:

 
[root@center230 libexec]# catcomponent_resource.sh
#!/bin/sh
#author:yangrong
#date:2014-05-20
#mail:10286460@qq.com
 
#pragrom_list=(VueDaemon VueCenter VueAgentVueCache VueSERVER VUEConnector Myswitch Slirpvde)
pragrom_list=(VueDaemon VueCenter VueAgentVueCache VueSERVER)
 
####获取cpu阈值和mem阈值#######
case $1 in
 --cpu)
   cpu_crit=$2
  ;;
 --mem)
   mem_crit=$2
  ;;
esac
 
case $3 in
 --cpu)
   cpu_crit=$4
  ;;
 --mem)
   mem_crit=$4
  ;;
esac
 
 
 
###判断传参数量,如果不为4,则var值为1,var0则正常####
if [[ $1 == $3  ]];then
       var=1  
elif [ $# -ne 4 ] ;then
       var=1
else
       var=0
fi
 
 
###打印错误提示信息
if [ $var -eq 1 ];then
   echo "Usage parament:"
   echo "    $0 [--cpu][--mem]"
   echo ""
   echo "Example:"
   echo "    $0 --cpu 50 --mem50"
   exit
fi
 
 
###把不存在的进程放一变量中
num=$(( ${#pragrom_list[@]}-1 ))
 
NotExist=""
for digit in `seq 0 $num`
do
 a=`ps -ef|grep -v grep |grep ${pragrom_list[$digit]}|wc -l`
  if[ $a -eq 0 ];then
    NotExist="$NotExist ${pragrom_list[$digit]}"
    unset pragrom_list[$digit]
  fi
done
#echo"pragrom_list=${pragrom_list[@]}"
 
 
 
####对比进程所占资源与阈值大小
cpu_use_all=""
mem_use_all=""
compare_cpu_temp=0
compare_mem_temp=0
for n in ${pragrom_list[@]}
do
  cpu_use=`top -b -n1|grep $n|awk '{print $9}'`
  mem_use=`top -b -n1|grep $n|awk '{print $10}'`
   if[[ $cpu_use == "" ]];then
       cpu_use=0
   fi
   if[[ $mem_use == "" ]];then
       mem_use=0
   fi
 
  compare_cpu=`echo "$cpu_use > $cpu_crit"|bc`
  compare_mem=`echo "$mem_use > $mem_crit"|bc` 
   if[[ $compare_cpu == 1  ]];then
       compare_cpu_temp=1
   fi
   if[[ $compare_mem == 1  ]];then
       compare_mem_temp=1
   fi
 
  cpu_use_all="${n}_cpu_use=${cpu_use}% ${cpu_use_all}"
  mem_use_all="${n}_mem_use=${mem_use}% ${mem_use_all}"
done
 
 
###如果该变量有值,则代表有进程down。则退出值为2
if [[ "$NotExist" != ""]];then
 echo -e "Current ${NotExist} isdown.$cpu_use_all;$mem_use_all"
 exit 2
###如果cpu比较值为1,则代表有进程占用超过阈值,则退出值为2
elif [[ "$compare_cpu_temp" == 1]];then
   echo -e "$cpu_use_all;$mem_use_all"
   exit 2
 
##如果mem比较值为1,则代表为进程mem占用超过阈值,则退出值为2
elif [[ $compare_mem_temp == 1 ]];then
   echo -e "$cpu_use_all;$mem_use_all"
   exit 2
##否则则正常输出,并输出所占cpu与内存比例
else
   echo -e "$cpu_use_all;$mem_use_all"
   exit 0
fi

四、后话:

  随着近日编写shell脚本越来越多,有时难免会回改以前所写脚本,经常要看一段时间才能看懂。
  为方便后续的维护,在脚本当中,每一个函数,每一段功能,都做备注,方便以后自己或他人来进行维护。